WALLY AC EV Charging Station User Manual
DOC ID: UM210801.A0 19
It is recommended to use flame retardant rubber copper core cable as the input cable, pass the cable
through the input interface of the charging station, then fix the Neutral wire, Live wires (L1/L2) and
GND wire to the corresponding terminals, and finally fix the cable.
If the CMS is to be connected through the network cable, put the network cable through the
Charging
adapter
interface (
③
), then crimp the RJ-45 header, and then insert it into the network cable interface.
5.4.3.
Step 3:
Follow the arrow, and hold the wallbox Accessories(
④
) on the attachment.
Fig. 5-4 Hang the wallbox on the attachment
5.4.4.
Step 4
：
Tighten the set screws on the left and right ends to fixed the wallbox.
Fig. 5-5 Fixed the wallbox
The set screws
on the left and right ends
