WALLY AC EV Charging Station User Manual
DOC ID: UM210801.A0 22
e)
E-stop state
Fig. 6-2 LCD display
6.2.4.
RFID reader
In general, WALLY is equipped with RFID card reader as standard, and the charging process can be
started and stopped by using the RFID card (shown as Fig. 6-3) configured with the host. The
special customized card swiping function is not separately described here.
Fig. 6-3 RFID card
6.2.5.
Emergency stop button
This button is used to stop charging in case of emergency.
At any time, in case of any emergency (such as fire, smoke, abnormal noise, water inflow, etc.), on the
premise of ensuring personal safety, please press this button, and immediately stay away from the
charging station. And then contact the supplier.
6.2.6.
Charging connector & empty socket
M3W U-series AC EV charging station config a type 1 charging connector.
When the charging station is in standby state, please plug the charging connector in the empty socket in
order to protect the charging connector.
