www.lascarelectronics.com
Issue 1 10/2019 Page 4 of 6
EL-SIE-2+
High Accuracy Temperature and Humidity
USB Data Logger, EasyLog Cloud Compatible
LED AND SOUNDER STATUS INDICATION
The EL-SIE-2+ has three LEDs and a sounder to clearly indicate the status:
BUTTON FUNCTIONS
The two buttons are used to navigate between display screens and control other functions, some of which also create a record in an Event
Log, which can be viewed using the web browser.
If the display mode is set to Button Press, pressing any button wakes the display up, after which it operates as described above.
LEDs
Sounder
Status
Active
Alarm / Memory Full /
Calibration Expired
Off
Battery Low
LEDs
Sounder
Status
Off
Logger primed but not
yet logging / Pre-alarm
/ Memory 90% Full /
Calibration Pending
(check display for
specific warning)
Off
Logger in operation, no
alarms or warnings
Slow Flash
Flashing
Flashing
Flashing
Screen
Button
Press
Function
Event Recorded
USB
n/a
n/a
n/a
n/a
Push to Start
Any
Long
Start logging
n/a
Triggered Start
n/a
n/a
n/a
n/a
Delayed Start
n/a
n/a
n/a
n/a
Channel –
Current reading
Top
Short
Move to next channel or STOP LOG
n/a
Long
Clear alarm hold for all channels
Clear Held Alarms
Bottom
Short
Show Min reading for this channel
n/a
Long
Mute alarm sounder
Mute Alarm
Channel –
Min reading
Top
Short
Show Min reading for next channel or STOP
LOG
n/a
Long
Reset Max/Min reading for all channels
Clear Max/Min
Bottom
Short
Show Max reading for this channel
n/a
Long
Mute alarm sounder
Mute Alarm
Channel –
Max reading
Top
Short
Show Max reading for next channel or STOP
LOG
n/a
Long
Reset Max/Min reading for all channels
Clear Max/Min
Bottom
Short
Show current reading for this channel
n/a
Long
Mute alarm sounder
Mute Alarm
STOP LOG?
Top
Short
Move to Channel 1 (or Warning Screen), also
generates an Audit Mark when cycling back
through to Channel 1
Audit Mark
Bottom
Long
Stop logging, returns to Push to Start
n/a
Warning Screen
Any
Short
Move to next warning or Channel 1
n/a
