background image

AO Waveform Calibration 
Procedure for NI-DAQ mx

Contents

Conventions ............................................................................................ 2
Introduction ............................................................................................. 2
Software .................................................................................................. 3
Documentation ........................................................................................ 3
Test Equipment ....................................................................................... 4
Test Considerations................................................................................. 5
Calibration Process ................................................................................. 5

Calibration Process Overview ......................................................... 5
Initial Setup...................................................................................... 6
AO Verification Procedure .............................................................. 6

Analog Output Verification ...................................................... 6
Counter Verification ................................................................. 10

AO Adjustment Procedure............................................................... 12

AO Device Test Limits ........................................................................... 14

Using the Tables .............................................................................. 14

Range ........................................................................................ 14
Test Point .................................................................................. 14
24-Hour Ranges ........................................................................ 14
1-Year Ranges .......................................................................... 14
Counters.................................................................................... 14

NI 6711/6713—12-Bit Resolution................................................... 15
NI 6722/6723—13-Bit Resolution................................................... 15
NI 6731/6733—16-Bit Resolution................................................... 16

Summary of Contents for NI-DAQ mx

















Reviews: