CHAPTER 4
COMMUNICATION PROTOCOLS
4-14
DC-24 and DC-25 operation manual
Enter your computer User Name and Password.
To access the setup the Local Port, select
Channel1->Connection.
You will see a screen similar to the one above.
In Local Port insert the new value and click
OK
on the bottom of the page.
4.2.1.
UDP/IP configuration
Select
Channel 1 -> Connection
in the left menu.
Select the UDP
protocol in “Connection protocol”
Select
Datagram Type = 1
in Datagram Mode
Introduce the following in Endpoint Configuration
Local Port
= 10001
Remote Port
= Port of the equipment that will be connected.
Remote Host
= IP address of the equipment that will be connected.
Click OK in the bottom of the page.
Click
Apply Settings
in the left menu.