Megatower
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
23 of 6
7
6.0 ORIENTING LIGHTS
•
To orient the lights, have the mast in the horizontal
position.
•
In between the lights, you will find 3 bolts at the base of
each light that need 3/4" Wrenches to loosen. This will
allow you to pivot the light up or down in order to access
the 180 degree orientation settings.
•
There are 2 bolts on each side of every light. The one
bottom bolt
needs to be loosened, while the orientation
locker needs to be fully removed on each side before
changing
the orientation
of the light
.
•
Once the orientation bolts are removed, you can swivel
the light to any of the settings and secure the bolts back
into the lights tightening them all fully to lock the
orientation into place for each light.
F
igure
6.0.1
F
igure
6.0.2
F
igure
6.0.
3
NOTE: LIGHT HEADS NEED TO BE SET BACK TO
ORIGINAL ORIENTATION, SEE FIGURE 6.0.2, BEFORE
TRANSPORT.
•
User should reposition lights for best light output.
o
Best light output may vary depending on use.
•
The following pages contain the layout for light
head positioning in an ideal situation. See Figures
6.0.4 and 6.0.5 for reference.
