background image

Read this user manual before using frequency converter.

Keep this user manual near the frequency converter for reading at any time.

Careful in transporting the frequency converter to avoid impact.

Do not put the frequency converter on uneven or inclined 

surface

.

Do not block the venting holes or slits to keep the frequency converter well-cooling effect, the back of the

 

frequency converter should keep 10 cm (4 inches) away from the wall.

Double check the frequency converter and power supply specifications are matched and well-wired before

 

power connection to avoid any careless damage.

Frequency converters have different installations according to different capacities and voltage levels,

 

choose an appropriate configuration and cable diameter.

Do not overload the frequency converter to prevent the electric shock or cause fires.

Please follow 

all applicable local and national electrical and building code

.

In case of abnormal phenomenon happens, follow this user manual in troubleshooting or contact the

 

manufacturer.

Please keep frequency converter clean and do not put heavy objects on top of it.

Prevent any liquids and sundries into the frequency converter, in order to avoid poor contact or short 
circuit

electric shock

,

 or fire.

U

nplug the power cord in storm

y weather.

Avoid placing in direct sunlight, raining or humid place.

Keep it away from the source of ignition and heat to prevent overheat.

Unplug

 the power cord during moving or maintaining the frequency converter.

IND-SFC Series

 

Safety Information

Larson Electronics, LLC

 

Phone: (877) 348-9680

 Fax: (903) 498-3364 

  www.larsonelectronics.com 

Summary of Contents for IND-SFC Series


















Reviews: