Larson Electronics HLX-SWG-EB Series, Instruction Manual

Page: 8 / 13

8
Correction factors
Degree of protection Degree of protection acc. to IEC/EN 60529
Connecting terminals IP20
Material
Enclosure Epoxy resin
Weight
Auxiliary contact
Version see circuit diagrams
Fault signal switch This switch indicates independent switching of the protective device on overload or short-circuit.
Auxiliary switch The switch indicates the status of the protective device (ON/OFF), whether it is switched manually
or automatically.
Correction factors for ambient temperatures other than 30 °C
10889E00 10887E00
10888E00
Type 8562/51 520 g
Type 8562/52 1040 g
Type 8562/53 1400 g
Type 8562/54 2050 g
Rated operating current [A] AC-14 230 V AC 5 A
DC-12 60 V DC 1 A
DC-12 48 V DC 2 A
DC-12 24 V DC 4 A
Min. switching voltage AC 24 V
DC 24 V
Min. switching current AC 10 mA
DC 200 mA
Rated short-circuit limit current:
back-up protection via fusible link
6 A gG 1 kA
HLX-SWG-EB Series
Larson Electronics, LLC Phone: Fax: (903) 498-3364 www.larsonelectronics.com
(877) 348-9680