STRYKER ST WIRELESS REMOTE
The Stryker ST wireless remote and the spotlight communi-cate at 2.4GHz. The Stryker ST wireless handheld remote is
compatible only with the Stryker ST spotlights. It will not function with Golight RadioRay, Golight GT Series or Stryker
spotlights prior to ST Series.
The ST wireless remote can operate one or two spotlights, either individually or simultaneously. Prior to pairing the
remote to the spotlight or spotlights, please familiarize your-self with the features as shown in Figure 4.
•
Indicator LED’s – When command is given, appropriate LED’s will light to indicate whether the remote is controlling
spotlight #1, spotlight #2 or both.
•
Spotlight Selector – Depress for 5 seconds to toggle between controlling spotlight #1 only,
spotlights #1 and #2 and spotlight #2 only
•
Home – from any position will rotate light to 0° position
•
Lamp On/Off – Turns lamp on and allows directional commands
•
Speed selector – Fast and slow
•
Directional Controls – Rotates and tilts spotlight
Figure 4
– Stryker® ST Wireless Handheld
Remote Features
PAIRING ST WIRELESS REMOTE TO ST SPOTLIGHT
Each ST wireless remote has a unique operating code. The
Stryker ST spotlight is not paired to the remote at the factory and must be paired by the user before the spotlight will
respond to the remote. The spotlight has a learn mode for pairing that is initiated for the first six seconds after power
is applied.
To pair:
1.
Disconnect power from the spotlight.
2.
Set remote for spotlight #1. Depress any directional key to check. The indicator LED for spotlight #1 only should
be lit when you do this. If not, depress the spotlight selector button for five seconds to toggle to next setting. You
may have to do this twice.
3.
Press and hold the on/off key + speed selector key on the remote while simultaneously reconnecting power to the
spotlight. After three seconds the lamp will flash three times to confirm the pairing process was successful.
OPTIONAL PAIRING POSSIBILITES:
It is also possible to pair:
•
One ST remote to control two ST spotlights
•
Two ST remotes to control one ST spotlight (transmitter replication)
When using one remote to control two spotlights, the spotlight selector function allows the user to control the
spotlights inde-pendently or in tandem.
OPERATION OF STRYKER® ST
1. Insert the cigarette plug from spotlight into the vehicle 12V
DC socket on magnetic mount models. On
permanent mount models connect the power wires to power source.
GL-3XXXST Series
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
3
of
5
