GL-2xxx and GL-3xxx Series LED Search Lights
Larson Electronics, LLC
Phone:
877-348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
3
LED Search Light - 12-24V DC, 460,000 Candela - Permanent Mount -
White
Housing
Instruction Manual
Thank you for your purchase of
a GL-2xxx or GL-3xxx series LED search light from
Larson Electronics.
WARNING
Standard Warning (General)
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
•
INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
RELEVANT LOCAL BUILDING CODES.
•
RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF
FIXTURE'S
ELECTRICAL
SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE
FIXTURE'S
RATED VOLTAGE.
•
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
SAFETY NOTICE
•
If replacing LED module, the LED module
connector should be connected correctly
for
positive and negative wires.
RED and BLUE: Positive (+)
BLACK and BROWN: Negative (-)
•
FCC RULE Part. 15.21
：
Changes or
modifications not expressly approved by
the
party responsible for compliance could
void
the user’s authority to operate the
equipment.
•
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may
not cause harmful interference, and
(2) this
device must accept any
interference
received, including
interference that may
cause undesired
operation.
•
This searchlight is a Radio Frequency (RF)
device which operates on Channel 433.92
MHz. It will send out RF energy when it is
in
operation.
1.
RF energy may affect some electronic
equipment.
2.
Some electronic equipment on vehicles
or
boats may be affected by RF energy.
IMPORTANT NOTICE
If searchlight DC power is disconnected (wires
disconnected from battery or power supply switched
off), after reconnecting to power, make sure to turn on
the searchlight using the wireless or wired remote, to
make a full 360° rotation, in order to reset the home
position memory.
SAVE THESE INSTRUCTIONS
