Larson Electronics EXPFL-31, Instruction Manual

Page: 4 / 5

3 Return to Table of Contents
II. Bulb Replacement
I. Replacement
Begin by unscrewing the lens cap of the flashlight.
The light housing is held together with the lens cap
by clicking into place. To separate the the housing
and the lens cap simply apply force and pull them
apart.
(Note: The bulb is held in place via a screw
attached to the lens, upon separation of the
housing and lens cap the bulb will be free, be
careful not to drop, lose, or break the bulb.)
The bulb is now free to be replaced.
Specifications
Power Source: 2 AA Cells
Bulb/Lamp: Xenon
Bulb/Lamp Life: 15 Hours
Light Output: 13,000 Beam Candlepower
Weight (Without batteries): 2.2 oz.
Replacement Bulb: XPR2AA #20350
Approximate Burn time during continuous use: 3 hours 30 min.
Approximate Burn time during intermittent use: 4 hours 30 min
Product Features
• UL Division 1 & 2 Listed
• Non-Conductive
• Passes 30 foot drop onto concrete
• 13,000 Candle Power
• Pushbutton Switch
• Pre-focused spot beam
• Key Ring
• Xenon Bulb
• Submersible to 100ft
• Pocket size
• Fits Helmet Clips