56
Explosion Proof Network IP Camera User Manual
With the function enabled, you don’t need to configure the port mapping for each port,
and the camera is connected to the Wide Area Network via the router.
Steps:
1.
Enter the UPnP™ settings interface.
Configuration >Advanced Configuration > Network > UPnP
2.
Check the checkbox to enable the UPnP™ function.
The name of the device when detected online can be edited.
Figure 6-17 UPnP Settings
6.3.9
Configuring Wireless Dial Settings
Purpose:
Data stream of audio, video and image can be transferred via 3G / 4G wireless
network.
Note:
The wireless dial function requires the support of the camera.
1.
Click the
Wireless Dial
tab to enter the Wireless Dial configuration interface.
2.
Check the checkbox of
Enable
to enable the wireless dial settings.
3.
Configure the dial parameters.
1)
Select the dial mode from the drop-down list. Auto and Manual are selectable.
If Auto is selected, you can set the arming schedule for dialing; If Manual is
selected, you can set the offline time and manual dialing parameters.
2)
Set the access number, user name, password, APN, MTU and verification
protocol. You can also leave these parameters blank, and the device will
adopt the default settings for dialing after other parameters are configured.
For your privacy and to better protect your system against security risks,
Summary of Contents for EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC
Page 8: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 56: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 147: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 166: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...