![background image](http://html1.mh-extra.com/html/larson-electronics/expcmr-ip-poe-4mp-ir-flx-23-jb-3-sfc/expcmr-ip-poe-4mp-ir-flx-23-jb-3-sfc_user-manual_3745446021.webp)
17
Explosion Proof Network IP Camera User Manual
Figure 2-9 Modifying the Network Parameters
8.
Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
9.
Input the password to activate your IP address modification.
2.2
Setting the Network Camera over the WAN
Purpose:
This section explains how to connect the network camera to the WAN with a static IP
or a dynamic IP.
2.2.1
Static IP Connection
Before you start:
Please apply a static IP from an ISP (Internet Service Provider). With the static IP
address, you can connect the network camera via a router or connect it to the WAN
directly.
Connecting the network camera via a router
Steps:
1.
Connect the network camera to the router.
Summary of Contents for EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC
Page 8: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 56: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 147: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 166: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...