![background image](http://html1.mh-extra.com/html/larson-electronics/expcmr-ip-poe-4mp-ir-flx-23-jb-3-sfc/expcmr-ip-poe-4mp-ir-flx-23-jb-3-sfc_user-manual_3745446015.webp)
11
Explosion Proof Network IP Camera User Manual
Refer to the Figure 2-2 to set network camera over the LAN via a switch or a
router.
Figure 2-1 Connecting Directly
Figure 2-2 Connecting via a Switch or a Router
2.1.2
Activating the Camera
You are required to activate the camera first by setting a strong password for it before
you can use the camera.
Activation via Web Browser, Activation via SADP, and Activation via Client Software
are all supported.
Activation via Web Browser
Steps:
1.
Power on the camera, and connect the camera to the network.
2.
Input the IP address into the address bar of the web browser, and click Enter to
enter the activation interface.
Notes:
The default IP address of the camera is 192.168.1.64.
For the camera enables the DHCP by default, you need to activate the camera
via SADP software. Please refer to the following chapter for Activation via SADP.
Summary of Contents for EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC
Page 8: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 56: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 147: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 166: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...