background image

EPLC2-WPLED-50W-RT

Larson Electronics, LLC

 

  Phone: (800) 369-6671 

 Fax: (903) 498-3364 

  www.larsonelectronics.com 

1

 of 

2

 

Be certain electrical power is OFF before and during installation and maintenance.

Luminaire must be connected to a wiring system with an equipment-grounding conductor.

To avoid explosion: 

Make sure the supply voltage is within the luminaires’ voltage rating.

Ensure the marked T rating is less than the ignition temperature of the Hazardous
Atmosphere.

Do not operate in ambient temperatures above those indicated on the luminaire nameplate.

Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

For supply connections, use wire rated for at least 110°C 
Recommended mounting height is 25-40 feet. 

MOUNTING 

This fixture offers an adjustable surface mounting system 
that allows this fixture to be mounted to any flat surface 
including walls and ceilings. A single ½-13 bolt is used to 
mount the fixture to the surface. 

Simply drill a hole in the 

desired mounting location, pass the bolt through the 

trunnion mount and the hole you drilled, and secure with a 

washer and nut. 

50W Hazardous Location Wall Pack LED Light

 - Surface Mount 

T5, IP67

 - Class 

I, II, III

Instruction Manual 

This explosion proof light is designed for illumination of industrial locations. It uses the latest in solid 
state lighting technology for long life, low maintenance and high efficiency. 

The unique design focuses the light where it is needed, giving improved efficiency over a 
conventional HID luminaire. 

An internal, universal input, power-factor-corrected switch-mode supply allows it to be used from any 

nominal  100-277V  AC  50/60  Hz  or  11-25V  AC/DC  power  supply 

(depending  on  model)

  without 

any variation in light output. 

See product label for correct input voltage.

 

WARNING 

To avoid the risk of fire, explosion or electric shock, this product should be installed, inspected 
and maintained by a qualified electrician only, in accordance with all applicable electrical codes. 

To avoid electric shock: 

Reviews: