![background image](http://html1.mh-extra.com/html/larson-electronics/epl-led-150w-rt-dimm/epl-led-150w-rt-dimm_instruction-manual_3715520002.webp)
EPL-LED-150W-RT-DIMM
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
5
WARNING
TO AVOID THE RISK OF FIRE, EXPLOSION OR ELECTRIC SHOCK, THIS PRODUCT SHOULD BE INSTALLED,
INSPECTED AND MAINTAINED BY A QUALIFIED ELECTRICIAN ONLY, IN ACCORDANCE WITH ALL
APPLICABLE ELECTRICAL CODES.
TO AVOID ELECTRIC SHOCK:
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
PRODUCT MUST BE CONNECTED TO A WIRING SYSTEM WITH AN EQUIPMENT-GROUNDING
CONDUCTOR.
TO AVOID EXPLOSION:
•
MAKE SURE THE SUPPLY VOLTAGE IS WITHIN THE VOLTAGE RATING.
•
ENSURE THE MARKED T RATING IS LESS THAN THE IGNITION TEMPERATURE OF THE HAZARDOUS
ATMOSPHERE.
•
DO NOT OPERATE IN AMBIENT TEMPERATURES ABOVE THOSE INDICATED ON THE PRODUCT
NAMEPLATE.
•
DO NOT OPERATE IF THE LENS, CORD, SEALS, HOUSING, RECEPTACLES, ETC. IS CRACKED OR
DAMAGED. IF SO, DISCONTINUE USE AND CONTACT MANUFACTURER FOR REPLACEMENT PARTS.
•
ALL FASTENERS SHOULD BE PROPERLY SEATED.
The EPL-LED-150W-RT-DIMM from Larson Electronics is an Explosion Proof High Bay Dimmable LED Light Fixture
provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED
technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance
cost older incandescent, metal halide and high pressure sodium lights.
WIRING
Standard pigtail(flying leads) wiring
We strongly encourage a licensed electrician install this product
, in all locations especially in outdoor areas
where weatherproofing may be required. Universal voltage driver permits operation at 100V - 277V AC, 50 or 60Hz
except those factory ordered with low voltage 11V to 25V AC/DC.
Low Voltage DC
Connect power to power supply outputting low voltage between
11-25
Volts DC.
This variable voltage allows greater versatility without affecting light output. Ensure
deutsch connectors are properly connected (If applicable)
For supply connections, use wire rated for at least 110°C
Recommended mounting height is 25-40 feet.
MOUNTING
The EPL-LED-150W-RT-DIMM comes standard with an adjustable surface mount bracket. The EPL-
LED-150W-RT-DIMM offers an adjustable mounting system that this fixture to be mounted to any flat
surface including walls and ceilings.
Check to ensure that all mounting hardware is included.
•
2 Small Brackets
•
1 Large Trunnion Bracket
•
8 Bolts
•
8 Lock-Washers
•
4 Nuts
Low Voltage DC
This explosion proof LED light is universal voltage capable and can be operated with 100-277V AC, 50/60 Hz without
modifications to the fixture. A low voltage version of this LED fixture that operates on AC/DC voltages from 11-25 volts is also
available. 18-48V AC/DC voltage models are available for network systems and marine vessels. We also offer an additional
347-480V high voltage, 125-250V DC, and 0-10V dimmable versions of this explosion proof LED light fixture.