Larson Electronics LLC www.LarsonElectronics.com [email protected]
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
MAINTENANCE
To avoid personal injury, disconnect power to the light and allow the unit to cool down before
performing maintenance.
Warning:
No user serviceable parts inside of fixture. Risk of electrical shock. Removal of the
lens will void warranty.
1)
We suggest performing visual, mechanical and electrical inspections on a regular basis. We
suggest routine checks to be made on a yearly basis. Frequency of use and environment should
determine this. It is recommended to follow an Electrical Preventive Maintenance Program as
described in NFPA 70B: recommended Practice for Electrical Equipment.
2)
If the lens requires periodical cleaning to ensure continued photometric performance, clean the
lens with a damp, non-abrasive, lint-free cloth. If not sufficient, use mild soap and water.
3)
Inspect the outside of the Luminaire housing to ensure that they are free of any obstructions or
contamination. Clean with a non-abrasive cloth if needed.
4)
Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.
5)
NOTE:
Other wiring compartments are factory torqued and should not be tampered with during
installation or maintenance.
