EPF-LPSM Series
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
OPERATION
The fan will operate and exhaust when power is supplied to it.
Internal louvers are mechanical, and will open when fan is
operating, then shut when power is off to protect internals.
If using with a switch or hazardous gas detector, that device
must be wired in-line of the fan and supply power. Refer to the manual for the switch or gas detector to be used for
specifics of it's functionality and installation.
Be sure the device matches the required voltage for the exhaust fan, as
stated on the product label.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT
1-877-348-9680
FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
EPF-LPSM Series
is designed to provide years of reliable performance. Should the need for replacement parts
arise, please contact Larson Electronics.
