EPF-
24
SERIES
Larson Electronics, LLC
Phone:
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
MOUNTING
The fan includes the mount chosen upon purchase, pre-installed from factory.
Mount
the fan in the desired location and run power to the unit. A sturdy surface or pole mount should be
prepared and capable of handling
the load
of the unit
. Ensure all safety requirements are followed for the
hazardous area.
Attach safety cable between mount point and frame.
The fan head can be adjusted by loosening the two bolts near the adjustment point. Tighten the bolts once the
desired tilt is achieved.
LUBRICATION
This motor is equipped with pre-lubricated ball bearings. The original supply of lubricant is kept free of dirt, grit
or outside contamination by the bearing closures and does not require replenishment for the life of the bearing
under normal operating conditions.
MAINTENANCE
It is recommended that you implement a standard monthly or more frequent preventive maintenance
schedule. Safety requires a thorough visual examination of the unit for physical damage that might cause a
spark or result in the ignition of hazardous atmospheres.
Maintenance includes a careful examination to ensure at least:
A.
The Cable is not frayed and is gripping tightly in all points of cable contact.
B.
The Cable Jacket is completely intact and that no internal conductors or conductor insulation
is exposed.
C.
The Connection Box is not cracked, broken or breeched.
D.
The Cord Plug is not cracked or damaged and the Ground Post is intact.
Keeping blades clean and free of material splatter, overspray, and debris during usage will ensure the
maximum life of the fan. An accumulation of dirt may cause blade vibration and motor overload. Occasionally
check tightness of blade set screws.
NOTE:
Handle the propeller carefully as it is factory balanced and aligned to ensure smooth operation.
TROUBLESHOOTING
Refer to the guide below or contact the manufacturer if the fixture does not function properly.
Is the correct line voltage being supplied?
Is the fan properly grounded?
Make sure installed power switch is functioning properly (if applicable).
These instructions may not cover all details or variations of this product for your equipment or installation
requirements. Should further information not covered by these instructions be required, please contact Larson
Electronics at 1-
for further assistance.
Please visit LarsonElectronics.com for
Warranty
and
Return
information.
(877) 348-9680
877-348-9680
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT
1-877-348-9680
FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
