Larson Electronics LLC www.LarsonElectronics.com [email protected]
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
inoperative and will have to be replaced. The charger will indicate a full charge condition
(Green LED), but the battery will not power the light.
Do not short circuit the battery. A short circuit will occur if the electrical contacts (contact rings)
on the inside end of the battery come in contact with each other by metal (such as coins, clips,
pens, keys or necklaces, etc.). This will cause the internal fuse to blow.
The battery and charger are calibrated to sense charge rate and charge capacity. Under normal
circumstances the system works reliably. Excessive temperature, power surges, or shock can
cause the circuits to sense an unstable condition that will cause the internal fuse to blow.
BATTERIES
Batteries can be charged and discharged hundreds of times. When a noticeable drop in battery
performance occurs, it is time to replace the battery module. We recommend changing the
battery once a year depending on usage. Shorter durations may be necessary with extensive
use of the light.
While charger is not in use, disconnect the power supply. Do not leave the battery on the
charger past full charge indication as the charger could sense an overcharge condition if a
power surge occurs. Overcharge can shorten the lifespan of the battery. Before charging, make
sure the power switch is “OFF”.
Only use the charger and battery that was shipped with the light. Do not use other types of
batteries or chargers. To do so will damage the light and void your warranty. Your dealer has
spare batteries and chargers available.
