NMS045 Reference Manual
Measurement Setup
A-10
defining trigger and exceedance levels, see
section
6.2.6
in the
SLM
Model 831C Reference Manual
.
Other alerts, such as an Intrusion Detection alert are available through
the RV50X. For more information about setting up this alert, see 2.5.3
"Configuring the Intrusion Detection" on page 2-7.
To set up an exceedance alert notification, follow these steps:
Step 1
Connect the 831C to a router with Internet access via WiFi or TCP.
Step 2
Create an Event History Setup File with an alert as described in
section
17.3.1
of the
SLM Model 831C Reference Manual
. Follow the directions in
that section to enable email alert notifications.
TRY THIS
Use the process described here to set up an email or text alert when the
SPL 2 or Peak 3 Trigger exceeds the set threshold. Then Run a
measurement, and cause a trigger event. Observe the resulting email or
text with an attached sound recording.
A.6.1 Listening to OGG Files
The 831C supports interfacing with the meter using a browser. This
function is in beta testing, and the functionality is not complete.
Support for browsers and audio playback is summarized below:
A.7 Measurement Setup
To learn more about setting up a measurement, refer to
Module 6:
Measurement Setup
in the
SLM Model 831C Reference Manual
.
Table A.4 Audio Playback
Platform
Browser
Audio File (.OGG)
Windows
Internet Explorer - Not
recommended
No Supported
Chrome - Recommended
Supported
Firefox
Not Tested
Microsoft Edge
Not Tested
Mobile (Apple &
Android)
Chrome - Recommended
Supported
Safari
Requires CODEC download
and installation
Opera
Not Tested
Symbian
Not Tested
