NMS045 Reference Manual
Installing the NMS045 on the TRP019 Pole
3-3
CAUTION
Do not stand
underneath the pole.
Step 4
Using the rope attached to the top ring, pull gently until
the top half of the pole tip down. The rope prevents the
pole from hitting the ground. Ensure you create adequate
clearance for the pole to tip down so the pole does not
contact electrical wires or surfaces. For more information
on clearance distance, refer to Figure A-3 TRP019
Dimensions.
FIGURE 3-3
Tip-down position
3.3.2 Installing the Battery and Main Plate
Before you begin:
• If the system includes options, such as a solar panel or weather
station, do not install the battery until you’ve mounted all
options. See Module Module 4 "Options Installation" for instal
-
lation procedures.
• If the battery cables are not yet installed, see section 2.2 "Pre
Step 1
Open the box using the supplied driver. Place the battery
on the bottom battery plate. If you have one battery, place
it on the left side with the connectors on the outside. For
two batteries, place on either side with connectors on the
outside.
