LT-1000 User & Installation Manual
Installation
Lars Thrane A/S
www.thrane.eu
6 of 42
Condensation and water intrusion
If possible, install the LT-1000 NRU such that direct spray of seawater is avoided.
In some weather conditions there may occur condensation inside the LT-1000 NRU. The bottom part of the
LT-1000 NRU is designed to lead water away from inside of the device.
Make sure not to cover the ventilation holes around the connector at the bottom side of the LT-1000 NRU.
These holes are used for ventilation of the construction and for the pressure sensor. Also, make sure that
there is free space around the communication cable through the pole mount.
It is recommended not to use pneumatic tools for cleaning the LT-1000 NRU, especially at a short distance,
and directly at the split between the top and bottom part of the enclosure.
Pole or Roof Mount installation
It is possible to use either a pole or roof mount, when installing the LT-1000 NRU, see Figure 4 (roof mount)
and Figure 5 (pole mount).
The following two sub-chapters will in details, step-by-step, describe how to complete an installation with
either a pole or roof mount
·
Pole mount installation, see Pole Mount installation on page 7
·
Roof mount installation, see Roof mount installation on page 15
NOTE:
The LT-1000 NRU is delivered with both a Pole Mount and a Roof Mount. For further details on
what is in-the-box, see
Unpacking
on page 5.
F
IGURE
5:
LT-1000
NRU
WITH
P
OLE
M
OUNT
.
F
IGURE
4:
LT-1000
NRU
WITH
R
OOF
M
OUNT
.
Summary of Contents for LT-1000 NRU
Page 2: ......
