background image

Utility Fans

1

Installation, Operation and Maintenance Manual

Please read and save these instructions for future reference. Read carefully before attempting to assemble, 
install, operate or maintain the product described. Protect yourself and others by observing all safety 
information. Failure to comply with these instructions will result in voiding of the product warranty and may 
result in personal injury and/or property damage.

Document 480081

 

Model XUEF(D)-100, XUEF-200, 300 and 400

Utility Fans

General Safety Information

Only qualified personnel should install this fan. 
Personnel should have a clear understanding of these 
instructions and should be aware of general safety 
precautions. Improper installation can result in electric 
shock, possible injury due to coming in contact with 
moving parts, as well as other potential hazards. 
Other considerations may be required if seismic 
activity is present. If more information is needed, 
contact a licensed professional engineer before 
moving forward.

1.  Follow all local electrical and safety codes, as 

well as the National Electrical Code (NEC) and the 
National Fire Protection Agency (NFPA), where 
applicable. Follow the Canadian Electric Code 
(CEC) in Canada.

2.  The rotation of the wheel is critical. It must be free 

to rotate without striking or rubbing any stationary 
objects.

3.  Motor must be securely and adequately grounded.

4.  Do not spin fan wheel faster than max cataloged 

fan RPM. Adjustments to fan speed significantly 
effects motor load. If the fan RPM is changed, the 
motor current should be checked to make sure it is 
not exceeding the motor nameplate amps.

5.  Do not allow the power cable to kink or come in 

contact with oil, grease, hot surfaces or chemicals. 
Replace cord immediately if damaged.

6.  Verify that the power source is compatible with the 

equipment.

7.  Never open access doors to a duct while the fan is 

running.

XUEF-300

XUEF-200

XUEF-400

XUEFD-100

XUEF-100

Summary of Contents for XUEF-100





















Reviews: