14
VEGA 23:1
English
• use the provided lubricant (
G1
) (
rif. 16325
) in order to make
the sliding of the piston easier inside the sealing pack and
interpose oil to air.
G1
Daily check that the ring nut is covered with hydrau-
lic oil (
rif. 16325
); the oil improves the sliding of
the piston and prevent the product, coming out
from sealing gaskets, to dry once the equipment
is stopped.
• fix the spraying nozzle on the gun, choosing the suitable
nozzle according to the characteristics of the product to be
used and the kind of operation to be performed.
Plunge the suction hose (G1) and the recircu-
lation hose (G2) in the product container (G3).
G1
G2
G3
• Open the recirculation tap.
• When the air tap (
G4
) is closed, make the air flow from the
compressed air supply.
Check on the pressure gauge (
G5
) that the pressure does not
exceed 2-3 Atm
[adjust it with the knob
(
G6
)
of the regulator]
.
With an empty pump, a higher pressure might
cause a quick and violent movement of the piston,
which could be dangerous. Beside this, starting
with the max pressure (6-8 bar) the pump will not
be able to fill the chamber considering the high
speed of the cycle.
•
Open the air tap (
G4
).
G4
G6
G4
G5
