English
11
• Remove the suction pipe and take away the solvent tank.
•
Point the gun at the solvent tank and press the trigger so as
to recover the residual solvent.
• As the pump idles, press the ON/OFF switch (
F3
) on the
position "
OFF"
(0) to stop the tooling.
Absolutely avoid to spray solvents indoors. In
addition, it is recommended to keep away from
the pump in order to avoid the contact between
the solvent fumes and the electric motor.
•
Insert the gun trigger lock and assemble the nozzle.
PREPARATION OF THE PAINT
• Make sure the product is suitable to be used with a spray
gun.
• Mix and filter the product before using it. For filtration, use
CLOSE-MESH
(
ref.214
) and
LARGE-MESH
(
ref.215
)
LA-
RIUS METEX
braids.
Never use products containing halogen hydrocarbons (
as
methylene chloride
). If these products come into contact with
aluminium parts of the equipment, can provoke dangerous
chemical reactions with risk of explosion.
Make sure the product to be used is compatible
with the materials employed for manufacturing
the equipment (
stainless steel and aluminium
).
Because of that, please contact the supplier of
the product.
G
WORKING
START OF THE PAINTING OPERATIONS
• Use the tooling after performing all the
SETTING UP
operations
above described.
• Dip the suction pipe (
G1
) into the product tank.
•
Now the machine is ready. Should you use water paints,
besides the solvent wash, a wash with soapy and then clean
water is suggested.
OFF
F3
G1
F8
