English
8
F
SETTING-UP
CONNECTION OF THE FLEXIBLE HOSE TO THE GUN
• Connect the high pressure flexible hose to the pump and
to the gun, ensuring to tighten the fittings (
the use of two
wrenches is suggested
).
NEVER
use sealants on fittings’ threads.
• It is recommended to use the hose provided with the standard
kit (
ref. 35017
).
NEVER
use a damaged or a repaired flexible hose.
CHECK ON POWER SUPPLY
•
NEVER SPRAY OVER FLAMMABLE PRODUCTS OR
SOLVENTS IN CLOSED PLACES.
•
NEVER USE THE TOOLING IN PRESENCE OF POTEN-
TIALLY EXPLOSIVE GAS.
The high speed of travel of the product in the hose
can create static electricity through discharges and
sparks. It is suggested to earth the equipment.
The pump is earthed through the earth cable of
the supply. The gun is earthed through the high
pressure flexible hose. All the conductors near
the work area must be earthed.
•
TIGHTEN AND CHECK ALL THE FITTINGS FOR
CONNECTION BETWEEN PUMP, FLEXIBLE HOSE AND
SPRAY GUN BEFORE USING THE EQUIPMENT.
•
ALWAYS USE THE FLEXIBLE HOSE SUPPLIED WITH
STANDARD KIT. THE USE OF ANY ACCESSORIES OR
TOOLING OTHER THAN THOSE RECOMMENDED IN
THIS MANUAL, MAY CAUSE DAMAGE OR INJURE THE
OPERATOR.
•
THE FLUID CONTAINED IN THE FLEXIBLE HOSE CAN
BE VERY DANGEROUS. HANDLE THE FLEXIBLE HOSE
CAREFULLY. DO NOT PULL THE FLEXIBLE HOSE TO
MOVE THE EQUIPMENT. NEVER USE A DAMAGED OR
A REPAIRED FLEXIBLE HOSE.
Always check the product is compatible with
the materials composing the equipment (
pump,
spray gun, flexible hose and accessories
) with
which it can come into contact. Never use paints
or solvents containing Halogen Hydrocarbons (
as
the Methylene Chloride
).
If these products come into contact with aluminium
parts can provoke dangerous chemical reactions
with risk of corrosion and explosion.
IF THE PRODUCT TO BE USED IS TOXIC,
AVOID INHALATION AND CONTACT BY USING
PROTECTION GLOVES, GOGGLES AND PROPER
FACE SHIELDS.
TAKE PROPER SAFETY MEASURES FOR THE
PROTECTION OF HEARING IN CASE OF WORK
NEAR THE PLANT.
Electrical safety precautions
•
Check the "ON/OFF" switch is on the "OFF" position before
connecting the cable to the mains.
•
Never carry a plugged-in equipment.
•
Disconnect the equipment before storing it and before
performing any maintenance operation or replacing of ac-
cessories.
•
Do not carry the equipment neither unplug it by pulling the
electric cable.
Protect the cable from heat, oil and sharp edges.
•
When the tool is used outdoors, use only an extension cable
suited for outdoor use and so marked.
•
Take care when the pumping rod is moving.
Stop the machine whenever someone is within its vicinity.
•
Repairs of the electrical equipment should only be carried
out by skilled personnel, otherwise considerabledanger to
the user may result.
Never attempt to tamper with the calibre of
instruments.
Make sure that the electrical system is earthed and
complies with regulations.
