11
GHIBLI 24:1 DE
English
•
Carefully extract the motor cylinder fom the pump.
•
Check the condition of each part of the motor.
•
For any eventual replacement of the screws (
M3
) of the
traverse, for their reassembly and correct adjustment see
the drawing below and the exploded view on page 14.
N
DISASSEMBLY OF THE
PUMPING GROUP
Always close the compressed air supply and
release the pressure in the plant beforecarrying
out the disassembly of the pumping group. In
case the product being used is toxic, follow
the procedure of cleaning described on page 8 to avoid
the contact with the product during the disassembly of the
pumping group.
•
Disconnect the high pressure hose at the outlet of the
pump.
•
Unscrew the coupling sleeve so as to disconnect the pumping
group from the motor.
•
Unscrew the nut
(
N1
), the security dowel
(
N2
) and the nut(
N3
)
[it is suggested to hold the support tube with pliers when
unscrewing the nut (
N3
)]
.
•
Unscrew the fitting(
N4
) from the piston rod.
•
Remove the cup
(
N5
)
and unscrew the packing nut
(
N6
).
M3
Nut
Washer
Gasket
Bush
Washer
Gasket
Nut
Traverse
Motor cylinder
N3
N2
N1
N4
N5
N6
Coupling
sleeve
