2
GHIBLI 24:1 DE
English
A
B
WORKING PRINCIPLE
GHIBLI 24:1 DE
is a high pressure pneumatic pump used for
extrusion and transferring of high viscosity products.
The pump is essentially constituted of an air motor and of a structure
called "material pumping group" or simply "pumping group".
In the pneumatic motor, compressed air causes the vertical recipro-
cating movement of the motor piston; this movement is transmitted
through a connecting rod to the material pumping piston ending
with a shovel plate alowing to suck very viscous products.
The ratio 24:1 means that the outlet pressure of material is 24
times higher than the pump feed air pressure.
TECHNICAL DATA
GHIBLI 24:1 DE
3-7 bar
168 bar
1/2" GAS (F)
4 l/min (6,4 cpm)
15
60
3/4" GAS CON. (F)
<80 dB (A)
PUMP FEED AIR PRESSURE
MAXIMUM PRESSURE OF THE PRODUCT
*FEED AIR INLET
MAXIMUM DELIVERY
CYCLES PER LITRE
MAXIMUM CYCLES PER MINUTE
MATERIAL OUTLET [CONICAL GAS (F)]
NOISE PRESSURE LEVEL
Parts of the pump in contact with the material
Pumping group: galvanized carbon steel
Sealing balls: stainless steel AISI 420B
Gaskets: Teflon, Viton
Other parts of the pump
Motor casing and motor piston: aluminium
Always observe these instructions carefully
when evaluating the product compatibility and
in case of disposal of some parts of the pump no
more usable, in order to meet the environmental
regulations on recycling process.
*N.B.
The pump is supplied with a bayonet connection.
