S4
S1
S2
S3
GHIBLI 10:1 PNEUMATIC WASHING PUMP
NOTE
ATTENTION!
FOr THE
rEASSEMBLING OF THE
GASKETS, rESPECT THE
OrDEr AS SHOWN IN
THE DrAWING.
Fig. 2P
Fig. 1S
Fig. 2S
www.larius.com
16
REV.
02 - 06/2021 - Cod. 150186
• Extract the piston rod from the housing.
• Unscrew the packing nut
(
S4
) (
use a metal rod with an internal diameter of 6 mm
).
• Remove the gaskets and packing glands.
• For the correct reassembling of the gaskets see the illustration below and the exploded view on page 18.
Tighten the packing nut only after inserting again the piston rod into the housing (
it is suggested to insert the
piston rod from the top to avoid to ruin the gaskets
).
