ETHERLINE
®
ACCESS NF04T | Version 1 | 04/16/20
22
Status:
= Rule is active; a click on the lamp symbol changes the rule status to inactive
= Rule is inactive: A click on the lamp symbol changes the rule status to active
Possible actions:
delete a rule
edit a rule
copy a rule
In the case of a “Basic NAT” rule, all ports for “WAN to LAN” data transfer are initially blocked for this rule for
security reasons!
In order to enable access, packet filter rules must be created
or the default action for the packet filters be set to “Accept”.
See the following chapter.
The “LAN to WAN” data transfer is initially always released but can also be limited by packet filters or the default
action.
A maximum of 128 basic NAT entries can be defined.
