ETHERLINE
®
ACCESS NF04T | Version 1 | 04/16/20
12
3.2
Connection of the power supply
The ETHERLINE
®
ACCESS NF04T must be supplied with 24 V DC at the wide range input 18-30 V DC via the
provided connector. Connection FE is for the functional ground. Connect this correctly with the reference potential.
The RJ45 “P1 WAN” socket is for the connection of the external network. The RJ45 “P2 LAN –P4 LAN” sockets are
switched and are for the connection of the internal network.
The inputs IN1 and IN2 do not yet have a function in the current firmware version but will be available in a later
firmware version for the external switching of firewall rules.
3.3
LEDs status information
PWR
Off
No power supply or device defective
On
Device is correctly supplied with voltage
RDY
On
Device is ready to operate
ACT
Flashing light or On
Data transfer permitted between WAN and LAN
USR
Flashing light
Reset to works setting activated
RJ45 LEDs
Green (Link)
Connected
Orange (Act)
Data transfer at the port
