23
Align the Metal Piece with the Drip Edge and
Fasten through Pre-Drilled holes with
3/4” Rubber
Washer Screws.
Install the Smallest Right Side Metal Piece.
Slide this piece up through until it is aligned with
the Drip Edge.
Install the next Right Side Metal piece as shown
in the previous steps
Install the next Left Side Metal Piece. You will
need to slide this side under the first Metal Piece
that was installed, as shown in next step.
Fasten with
3/4” Rubber Washer Screws as shown
in previous steps.
Screw
Locations
Screw Locations
Screw Locations
Slide this piece under
the other piece
This piece
overlaps on top.
Screw Locations