Tools Required for Job (Not Provided)
6’ & 10’
Step
Ladders
Rubber
Mallet
Hammer
Ratchet with
9/16” & 5/8””
Socket
Cordless
Drill
25’ Tape
Measure
Utility
Knife
(4) 2x4x8’ Long
(2) 2x4 Approx 4’ Long
for bracing header assemblies
Congratulations on purchasing your new Pavilion. Thank You for your purchase and Welcome to the YardCraft
Famiy.
This manual is designed to simplify the assembly process, however we recommend having an experienced
carpenter involved in the project. Please read through the entire manual before starting!
The Pavilion put together for this manual was a 12x12 Pavilion. It took 2 men, approximately 6 hours using the
tools shown. However, it may take you longer since it will be a new project for you.
Take a deep breath and get at it; the satisfaction and enjoyment of this pavilion is only a few hours away.
Have fun!
You have purchased a product that consists of heavy, bulky pieces. With your purchase, you assume full
responsibility to have the necessary manpower and/or equipment available to unload the items. You also agree
that any damage that happens to the equipment, product, or individuals during the unloading process, or during
the entire construction process, is your responsibility, and neither the seller, nor the manufacturer, will be held
liable for any such damage.
12x12 Pavilion
Assembly Manual
Level
2” Square
Drive and
1/4” Hex
Drive Bit
Also a
T 30
Stardrive
Bit
1/4”x6” Drill
Bit
C- Clamp
or Vise Grip
Clamp
