10
Locate the post boot pieces. There is some with
notches and some without.
The piece with the notch goes on the side that
the Anchor Brackets are attached to.
Place the post boots against the post as shown.
Fasten together with 2
1/2” Screws into Pre-Drilled
Holes.
Install the Corner Braces. There are 4 Left Hand, and 4
Right Hand Braces. They are notched and made to fasten
on the outside of the post, and the inside of the header as
shown. Fasten with 3
1/8” GRK Lags into Pre-Drilled Holes.
Fasten to the inside of the Header with 3
1/8” GRK
Screws.
Install the remaining braces at all Post Locations.
