Laplante V120103-RS11, Operation Manual

Page: 32 / 64

Operation manual
- 32 -
5.0: OPERATION
5.1 Before Initial Start-up
The operator must apply all relevant safety precautions, including those mentioned in this
book. The operator must have a formally training for authority operation this machine.
BE ALARM!
A careful operation is the best insurance against an accident!
5.2 Initial Start-up
5.2.1 Check the installation proposals, dimension drawing and electric cable size.
5.2.2 Check the electrical connections correspond to the local codes and that all wires
are clamped tight to their terminals.
5.2.3 Check the ground wire and an isolating switch for compressor.
5.2.4 Check transformer for correct connection.
5.2.5 Check that the motor overload relay is set for manual resetting.
5.2.6 Open the air outlet valve.
5.2.7 Connect the condensate drain outlet to a drain collector.
5.2.8 Check the oil level, and oil type as required.
5.2.9 Provide labels, warning the other operator.
5.2.10 Checking the main motor rotation direction
5.2.11 : Jog the compressor motor by Pull out the
“
Emergency stop
”
button and press
the
“
Start
”
button to spot start the compressor and check the rotation. The
rotation should be same to the arrow on the top face of belt guard (refer to figure
5-1). The other methods is when starting the compressor shortly, if feel the wind
out by the oil cooler, that shows the rotation is correct.
Figure 5-1 Run Direction