Laplante V120103-RS11, Operation Manual

Page: 19 / 64

Operation manual
- 19 -
If synthetic lubricants are not available contact your local lubricant supplier a lubricant that
meets the specification in Table 1 below.
3.3 Electric Specification Sheet
Table 3-2 cable size, overload relay and fuses
Description Voltage(V) AMP (A) SF AMP (A) Frequency(HZ) LPRS-11
230 23.6 27.1 60 No. 10 Wire
460 11.8 13.6 60 No. 14 Wire
Inlet Cable
Size No.
575 10.2 11.8 60 No. 14 Wire
230 - - 60 22~30
460 - - 60 12.5~18
Main Overload
Relay (A)
575 - - 60 8.5~12.5
As a general rule take the motors full load amp(FLA) X1.25 or (25%) = to determine
your breaker & wire size;
CAUTION
:
All electrical work must be performed by a qualified electrician and must conform to
national, state, and local electrical code in your area.
NOTE:
- The starting method is delta
- When change the voltage, the electrical component will be changed;
- Component is CSA or UL cert.