Sub-GHz LSI Evaluation Kit Start Guide
FEXL_SubGHz_EVA_startguide-02
1
1.
Attention on the handling of this product
This product is evaluation kit. It is available for evaluation only.
Any responsibility cannot be taken about building this product into other products.
Please use the application software of this product with the PC with which Japanese version Windows 7 is
installed.
It will become infringement of copyright, if all or a part of software of this product is reproduced without
permission of copyright or duplicate things are distributed.
Any responsibility cannot be taken about reconstruction and illegal use of this product.
If the example of a harmful electric wave interference should occur from this product, please change
operating frequency promptly, or suspend the output of an electric wave, and perform disposal for
interference evasion etc.
2.
Setup Flow
Please check when open the box and all the following articles are assembled first. If it should run short or should have
damaged, please inform a purchasing agency.
CD-ROM is packed only when first time purchase.
By shipment time, mounting parts etc may differ from a photograph in part.
Please prepare a stabilized power supply if necessary.
Please prepare serial communication software (Tera Term) if necessary.
A USB UART IC (FT232R), which is made by FTDI, is placed on the control board. Please download a
USB device driver from
- Sub-GHz LSI Evaluation Board… 1
- Control Board… 1
- USB(A-MicroB) Cable… 1
- CD-ROM… 1 (First time purchase only)
- Antenna… 1
*Attached antenna is for 800-900MHz band. If using other band (e.g.
400MHz), antenna gain will be worse. In case of testing
communication, please use proper antenna.