Sub-GHz LSI Evaluation Kit Start Guide
FEXL_SubGHz_EVA_startguide-02
8
For details of WCT3, please refer to “Wireless Control Tool3 User’s manual”.
(2) Tera Term (terminal software)
1.
Supply 3.3V power supply.
2.
Reset the control board.
3.
Start the terminal software (Tera Term).
4.
Set the terminal software.
* No prompt will be displayed by power-on, terminal software setting or reset.
5.
Verify the connection by a register read command. The connection is correct if confirm of “88” is
displayed in response to the read command “RREG 0B”.
*
When a power supply is re-switched on, please reboot terminal software (Tera Term).
Figure 7: Connection Confirmation Image
The Tera Term serial port settings are shown below.
The red frame indicates required settings. Use Tera Term version 4.63 or higher.
Figure 8:
Tera Term Serial Port Setting Screen