+ side up
B
A
An insulation tag was installed in your remote by the manufacturer to prevent the
battery from draining. Removing the tag from the remote before using.
Lithium Battery: CR2025 3V
Battery Life: Approximately 6 months.
1) Remove the battery holder by pressing the locking tab with your thumb
and pulling it out.
2) Replace the battery with the same type and the
side facing up.
3) Gently push in the holder until securely locked into place.
WARNING
BATTERY INFORMATION:
Replacing the Battery from the Remote Controller:
:
“
”
+
Do not recharge, disassemble or dispose of in fire.
Battery leakage may cause damage to the unit.
To avoid the risk of accident, keep batteries out of reach of children.
MAINTENANCE OF REMOTE CONTROL
Page 6
Page 9
b) During disc, MMC/SD or USB mode:
Press the TOP/ >|| button briefly to interrupt the playback of the disc, MMC/SD
or USB. Press again to resume normal playback of the disc, MMC/SD or USB.
Press the TOP/>|| button and hold for approximately 0.5 seconds to play the
first track of the disc, MMC/SD or USB.
c) In CD or MP3 disc mode, press the INT button shortly to sample the first 10
seconds of each track of current disc, the S-INT will be visible on the LCD display.
In MMC/SD or USB mode, press the INT button shortly to sample the first 10
part of each track of all, and the M-INT will be visible on the LCD display.
In MP3 disc, MMC/SD or USB mode, press the INT button and hold for more than
0.5 seconds to sample the first 10 seconds part of each track of current folder,
and the D-INT will be visible on the LCD display.
In the process of INT, pressINT button again to stop sampling and to continue
playing the current track.
d) In CD or MP3 disc mode, press the RPT button shortly to play the current track
repeatedly and the S-RPT will be visible on the LCD display.
In MMC/SD or USB mode, press the RPT button shortly to play the current track
repeatedly and the M-RPT will be visible on the LCD display.
In MP3 disc, MMC/SD or USB mode, press the RPT button and hold for more than
0.5 seconds to play the track of current folder repeatedly, and the D-RPT will be
visible on the LCD display.
In the process of RPT, press RPT button again to stop playing repeatedly mode.
e) In CD or MP3 disc mode, press the RDM button shortly to play all tracks on the
current disc in random order, and the S-RDM will be visible on the LCD display.
In MMC/SD or USB mode, press the RPT button shortly to play all tracks of the
MMC/SD card or USB in random order, and the M-RDM will be visible on the LCD
display.
In MP3 disc, MMC/SD or USB mode, press the RDM button and hold for more
than 0.5 seconds to play all tracks of current folder in random order, and the
D-RDM will be visible on the LCD display.
In the process of RDM, press RDM button again to stop playing in random order.
f) During the normal playback of MP3 disc, MMC/SD, USB:
Press the radio preset button 6 and 5 to move up and down10 tracks at a time.
In FM mode, press the ST briefly to select stereo or mono sound mode.
When press shortly, the LOUD mode is turned on, its to enhance the bass sound
effect when the volume level is low. Press again to cancel the loudness effect.
18. ST/MO BUTTON
19. LOUDNESS BUTTON
