Lanzar Optidrive OPTIX-5 Owner'S Manual And Installation Manual Download Page 7

Page: 7 / 8

- 6 -

*Wiring is not loose or cables misconnected/disconnected - ground is
important
*RCA cables are not faulty

TROUBLE SHOOTING

Symptom

Possible remedy:

Signal Processor

Check:

does not turn on.

*Remote Turn-On wire has (+) 12V
*(+) 12V wire has (+) 12V
*Ground wire is properly connected:

Level of sound is
low.

*Wiring is not loose or cables misconnected/disconnected
*RCA cables are not faulty

Background noise
is too high.

PRECAUTIONS

Enjoy your system, but use it wisely and safely!

* Be ware that repeated exposure to excessive volume levels can permanently damage you
hearing!

* Keep all electronics away from moisture, dust, extreme heat or extreme vibrations.

* Never drive with the volume raised so high you cannot hear what is occurring in traffic around you.

Dual Rear and Subwoofer System

Summary of Contents for Optidrive OPTIX-5








