Lanzar Optidrive OPTIX-5, Owner'S Manual And Installation Manual

Page: 3 / 8

- 2 -
CONTROLS AND OPERATION
1. Ground Terminal (GND).
2. Remote Turn-On Terminal (REM).
3. Power Terminal (+12V).
4. Power Indicator.
5. Front Channel Inputs.
6. Parallel Input Switch:
If there are 4 sets (2 pairs/ Front & Rear) RCA inputs available, place
this switch in the "IN" position. If there is only one pair of input RCA connectors being used,
place this switch in the "OUT" position to provide Front and Rear input from that single pair of
RCA inputs.
(Note that the Front inputs are es s entially the main inputs, thus providing an input to
these terminals, and properly selection of the various switch positions would provide
signals on ALL of the various outputs.)
7. Rear Channel Inputs.
8. Subwoofer Channel Inputs.
9. Subwoofer Input Switch:
If there is no dedicated subwoofer signal available from the signal
source, place this switch in the "ON" position to provide signal at the subwoofer output terminals.
If there is a dedicated subwoofer signal source available for this input purpose, place the switch
in the "OFF" position.