xPico® Embedded Device Server Integration Guide
8
1. Introduction
About the Integration Guide
This user guide provides the information needed to integrate the Lantronix
®
xPico
®
embedded device servers into customer-printed circuit boards. This manual is intended
for engineers responsible for integrating the xPico
embedded device server into their
product.
Note:
This document includes support for xPico embedded device server
versions XPC100100B-01, XPC100100S-01, XPC100100K-02, XPC10010MB-01
and XPC10010MS-01, and xPico Wi-Fi embedded device server versions
XPW100100B-01, XPW100100S-01 and XPW100100K-02. For integration
information for the Lantronix xPico Wi-Fi SMT embedded device server modules,
XPCW1002 and XPC@10003, please reference document 900-714 xPico Wi-Fi
SMT Embedded Device Server Integration Guide.
The sections in chapter 2 provide board schematic and layout recommendations for both
xPico (wired) and xPico Wi-Fi® products. Some of the sections apply to xPico (wired)
only or xPico Wi-Fi units only. Signals that are unused for a particular product can be left
floating. If the application has the potential to use both components as a stuff option it is
recommended to follow the design guide for all of the sections. The table below lists
which sections are applicable to the xPico (wired) and xPico Wi-Fi products.
Note:
“xPico” (wired) refers to the Ethernet-only versions of xPico embedded
device server.
Table 1-1 xPico and xPico Wi-Fi Features
Chapter 2 Section
xPico (wired)
xPico Wi-Fi
PCB Interface
X
X
Mating Connector
X
X
Antenna Interface
X
Antenna Placement
X
Ethernet Inteface
X
Serial Inteface
X
X
USB Device Port
X
LEDs X
X
General Purpose IO Pins
X
X
Reset Pins
X
X
Reference Schematic
X
X
Additional Documentation
Visit the Lantronix web site at
www.lantronix.com/support/documentation
documentation and the following additional documentation.
Document
Description
xPico Wi-Fi SMT
Embedded Device Server
User Guide
Datasheet for the xPico Wi-Fi W1002 and W1003 SMT
modules.
xPico Embedded Device
Provides information needed to configure, use, and
