background image

     

xPico® Embedded Device Server Integration Guide

  

10

 

2. Functional Description 

Designed for quick integration with minimal engineering effort, the chip-sized xPico

 

embedded device server provides simplicity and flexibility making it the easiest and 
fastest networking-enabling module on the market. 

xPico and xPico Wi-Fi device servers are extremely compact networking solution that 
enables Ethernet or Wireless connectivity on virtually any device with a serial interface. 
The included industry-proven Lantronix device server application and full IP stack allow 
seamless remote access to device data simplifying design integration while providing 
robust connectivity. 

As one of the smallest embedded device servers in the world, xPico and xPico Wi-Fi 
embedded device servers can be utilized in designs typically intended for chip solutions. 
A key difference with the xPico device server is that there is virtually no need to write a 
single line of code, translating to a much lower development cost and faster time-to-
market. 

Table 2-1  xPico Part Numbers 

Part Number

 

Description 

XPC100100B-01

 

xPico Device Server Module, Extended Temp, AES Encryption, Bulk, RoHS 

XPC100100S-01

 

xPico  Device Server Module, Extended Temp, AES Encryption, Sample, 
RoHS 

XPC100100K-02 

xPico Device Server Module Development Kit w/ Module, RoHS 

XPW100100B-01

  xPico Wi-Fi — IEEE 802.11 b/g/n Device Server Module, Extended Temp, 

Bulk, RoHS 

XPW100100S-01

  xPico Wi-Fi — IEEE 802.11 b/g/n Device Server Module, Extended Temp, 

Sample, RoHS 

XPW100100K-01

  xPico Wi-Fi — IEEE 802.11 b/g/n Device Server Development Kit w/ Module, 

RoHS 

XPC10010MB-01

  xPico IAP Device Server Module, Extended Temperature, Modbus, RoHS, 

Bulk 

XPC10010MS-01

  xPico IAP Device Server Module, Extended Temperature, Modbus, RoHS, 

Sample 

 

 

 

Summary of Contents for XPW100100K-01























































Reviews: