4: Configuration
Lantronix® xPrintServer® User Guide
46
Setting Printer Options
Use this selection to view and modify settings in a printer provisioned for the xPrintServer device.
1. Login to the xPrintServer device’s Admin interface (see
Logging In
.)
2. Click the
Printer
tab to access the
Printers > List
page (see
Figure 4-1.
)
3. Utilize
Search
as necessary to find a particular printer.
4. Click the
button beside the printer you wish to set printer options.
5. Click
Set Printer Options
in the popup command menu that appears (or
Cancel
within the
same menu if you want to back out of it.) Available printer settings appears.
Different printers will have different printer settings available for modification.
Some printers will have
multiple heading tabs
by which all the setting options are
organized.
Figure 4-9 Sample Printer Options
6. Click through available tabbed headings (all in dark blue) and make changes as desired.
7. Click
Save Changes
to save. A note verifying that settings have been saved successfully
appears on the screen. Changes to printer settings will remain in place until changed through
the xPrintServer unit.
8. Click the
Return to Printer List
button at any time to return to the
Printers > List
page.
The
printer options above
provides configurable settings
under six tabs: “Options Installed”,
“JCL”, “General”, “Output”,
“Advanced Options” and “Cover”.
The
printer options to the right
has several more configurable
settings organized beneath each
of ten tabs.
Different printer models will have
different sets of configurable
settings organized under one or
more dark blue tab(s) as
exemplified by the options
available in these printers. Clicking
a tab brings you to the modifiable
settings organized under that tab.
