4: Configuration Using Web Manager
Figure 4-8. UDP Connection Settings
Connect Protocol
Protocol
Select
UDP
from the drop-down menu.
Datagram Mode
Datagram Type
Configures the remote IP or network broadcast address and
the remote port. Enter
01
for directed or broadcast UDP. The
default setting is
00
.
Accept Incoming
Select
Yes
to accept incoming UDP datagrams.
Endpoint Configuration
Local Port
Enter the local port number.
Remote Port
Enter the port number of the remote device.
Remote Host
Enter the IP address of the remote device.
Use Broadcast
Select to broadcast the UDP datagram. The default is not to
broadcast.
Note:
Datagrams are sent as subnet-directed broadcasts.
Device Address Table
The table is enabled when
Datagram Type
is set to
FD
. Enter
values between
1
and
255
to identify units on the local
network of device servers.
Note:
Lantronix Tech Support supports Datagram type 01.
Datagram Type FD is for OEM use.
xPico User Guide
31