Appendix A: Command Reference
xPico® Wi-Fi® Embedded Device Server User Guide
82
configitem Stop Bits
value
Stop Bits
may be "1" or "2".
configitem Flow Control
value
Flow Control
may be "None", "Hardware" or "Software".
configitem Xon Char
value
When specifying
Xon Char
, prefix decimal with \ or prefix hexadecimal with 0x or prefix a single control
character with <control>. These are used when
Flow Control
is set to Software.
Xon Char
may contain one character, where <control>J, for example, counts as one.
configitem Xoff Char
value
When specifying
Xoff Char
, prefix decimal with \ or prefix hexadecimal with 0x or prefix a single control
character with <control>. These are used when
Flow Control
is set to Software.
Xoff Char
may contain one character, where <control>J, for example, counts as one.
configitem Gap Timer
value
The driver forwards received serial bytes after the
Gap Timer
delay from the last character received. By
default, the delay is four character periods at the current baud rate (minimum 1 ms).
Gap Timer
has units of milliseconds.
Blank the value for "<Four Character Periods>".
configitem Threshold
value
The driver will forward received characters after
Threshold
bytes have been received.
Threshold
has units of bytes.
configgroup Performance
These settings pertain to
Performance
. Changes take effect immediately.
The device wakes up either on the rising edge of
WKUP
, if enabled, or after being down
Maximum Time
Powered Down
.
The device powers down after
Time Powered Up
.
However, if any
Application
is selected, the application may hold power on longer or wake up sooner.
configitem Application
value Instance
Instance
matches the name of a registered application.
