Web-Manager Configuration
WiBox2100E User Guide
38
Connection Settings - UDP
To configure a channel’s UDP settings
:
1. From the main menu, click
Connection
for either Channel 1 or Channel 2 to
display the Connection Settings page for the selected channel.
Connect Protocol
Protocol
Select
UDP
from the pull-down menu.
Figure 4-7. UDP Connection Settings
2. In the available fields, enter the following information:
Datagram Mode
Datagram Type
Configures remote IP or network broadcast address and the
remote port. Enter
01
for directed or broadcast UDP. The
default setting is
00
.
Accept Incoming
Select
Yes
to accept incoming UDP datagrams.
Endpoint Configuration
Local Port
Enter the local port number.
Remote Port
Enter the port number of the remote device.
Remote Host
Enter the IP address of the remote device.
Use Broadcast
Select to broadcast the UDP datagram. The default is not to
broadcast. Datagrams of type 01 can be sent as a broadcast
by enabling this option. The default is not to broadcast.
Note:
Datagrams are sent as subnet-directed broadcasts.
Device Address Table
This table is enabled when
Datagram Type
is set to
FD
. Enter
values in the range 1-255 to identify units on the local network
