Lantronix SecureLinx SLK Series, User Manual

Page: 106 / 160

Using the OSD Interface to Configure the SLK
5-10 SecureLinx SLK Remote KVM User Guide
packets are lost during a short interval. This IP address does not need to be that of
the controlled server but might be a border router or other "always-on" network
component. To enable, enter an IP address to ping. To disable, type
0.0.0.0
(default).
14 HTTP Ping this address . The number designated for HTTP pings of addresses/
ports should be an IP address of a web (HTTP) server. The server will be asked to
get the root page. If nothing is returned (zero length) or the connection fails, this
error condition is considered active. To disable, type
0.0.0.0
.
15 HTTP Ping this port number . The number designated for HTTP pings of
addresses/ports should be an IP address of a web (HTTP) server. The server will be
asked to get the root page. If nothing is returned (zero length) or the connection
fails, this error condition is considered active. To disable, type
0.0.0.0
.
16 Hotspot temperature . Displays the current internal temperature of the SLK.
Third Monitor Settings Screen (SLK16 only)
Note: SLK8 shows Current Time (monitor menu 2) and Timezone Offset (monitor
menu 3).
Figure 5-8. Monitor Settings Screen – SLK16 Only (3 of 3)
17 Video monitoring server port . Allows configuring of the Java port used for video
monitoring to a custom port number.
18 Video monitoring view 1 . First of four arrangements of screens that you can store
as hexadecimal values.
19 Video monitoring view 2 . Second of four arrangements of screens that you can
store as hexadecimal values.
20 Video monitoring view 3 . Third of four arrangements of screens that you can store
as hexadecimal values.
21 Video monitoring view 4 . Last of four arrangements of screens that you can store
as hexadecimal values.