SDS2100 User Guide
3: Configuring the Unit
Figure 3-4. Server Properties Configuration on the Web Browser
3. In
the
Telnet Password
field, enter a password to prevent unauthorized access
to the Setup Mode via a Telnet connection to port 9999. The password is limited
to 4 characters. (An enhanced password setting of 16 characters is available
under Security Settings on the Telnet Setup Mode window.)
Note:
No password is required to access the Setup Mode window via a
serial connection.
4. Click
the
Update Settings
button.
Configuring via the Setup Mode Window
Using a Telnet Connection
To configure the unit over the network, establish a Telnet connection to port 9999.
Note:
You can also use the Telnet to Device icon on the DeviceInstaller
Device Management window to establish the connection.
1. From the Windows Start menu, click
Run
and type the following command,
where x.x.x.x is the IP address and 9999 is the unit’s fixed network configuration
port number.
Figure 3-5. Network Login Using Telnet
telnet x.x.x.x 9999
27